Dec 13, 2013 The Bescor MP 101 is now one of my key pieces of equipment in my video and audio arsenal. It provides really smooth pans and helps me set up my shots much quicker than before.
Thats a pretty nifty pan/tilt head. It can move a lot of mass if you balance the load. Here's a link to a picture of a remote controlled camera with a huge zoom lens and infrared lights I made with one. The lights pan and tilt with the lens by the way. The pan/tilt has DC motors and gearing, thats it. No position sensing as far as i could tell.
It does allow variable speed for both the pan and tilt axes. Its remote controllable through that round plug.
Nfs most wanted save game with all blacklist cars on youtube. Nfs Mw SaveGame With All Blacklist Cars Need For Speed Most Wanted. Need for Speed Most Wanted Special Save Game: 2,058: Tobey. Information and comments about the Need For Speed Most Wanted Nfs Mw SaveGame With All Blacklist Cars Login or Create an Account. NFS Most Wanted Save game 100% 214280; NFS Most Wanted BE 1.3 Trainer 126280. 100% (Challenge series, Career and Rap Sheet) savegame with all Blacklist racer's cars and 2+ million cash to spend. Installation: locate your Most Wanted save directory. It should be under Documents folder in NFS Most Wanted. Need for Speed Most Wanted. All Save Files, Step by Step All saved games from the game beginning to the end. He's dumped a whole lot of cash into his car. The Blacklist is a list of racers in Rockport that are of high. For the top 10 racers in Need for Speed: Most Wanted. 3 Need for Speed: Payback/Cars; Explore.
If you wanted to use one for timelapse, I wouldn't bother taking it apart. Just put a relay in the common wire on the remote plug. Use the relay to interrupt the movement except for a short pulse after each exposure is completed. If you have a Dynamic Perception MX-2 controller, use it to power the relay from either of the motor outputs. Any 12 volt relay should work as long as the coil draws less than an amp (pretty much any 12VDC relay). Use the MX-2 in interleaved (shoot, move, shoot) mode. The MX-2 will adjust the duration of the relay-on pulse depending on the inches per exposure you set.
Wire the pan/tilt to the relay contacts that conduct only when the MX-2 wants to move the dolly motor. You can set different speeds for the pan and tilt axes by adjusting the resistance from the common control wire to one or two of the other pins on the remote plug. This way only one motor plug on the MX-2 needs to be used to control two axes on the pan/tilt head and you can move each axis at a different speed if you want. The remote plug on the pan/tilt has five wires. Common, left, right, up, down. Conductivity between common and one or two of the other pins makes it go.
Grease torrent tpb. Version 1.0: Initial version.
Sat Jul 02, 2011 11:45 am. Well i ordered one of these, NEW, unfortunatly it arrived yesterday and it was clearly used, and it was a non functioning unit.
The Automatic mode worked, but the Manual mode does not, it was worn all around with grime in it. I just spoke to the company that sold it to me through amazon and they are sending me a return label, then will ship me a new one.
What a pain in the butt, i really wanted to crack this thing open however they are taking care of it. Mistakes happen. Anyway, my first impression was 'Wow, this thing is small!' It fits on my timelapse Rail Chronos 1.0 nicely. It just LOOKS like it belongs. The movement on the automatic mode is very smooth, very quiet.
The tilt was not working, if it WAS i probably would have kept it, but i did not want to find out that the tilt motor was not working. I opened the front plate, there is a control circuit in there as expected however there are a BUNCH of wires from the control circuit into the housing, i dont think they are all wires for the motors. Being a Bescor 101 i know it has a tab that hits a switch preventing a full 360 degree panning, so the extra wires are probably for that switch. Upon opening the other side (battery side) thats all it is, batteries, and a pair of wires.
- Author: admin
- Category: Category
Dec 13, 2013 The Bescor MP 101 is now one of my key pieces of equipment in my video and audio arsenal. It provides really smooth pans and helps me set up my shots much quicker than before.
Thats a pretty nifty pan/tilt head. It can move a lot of mass if you balance the load. Here's a link to a picture of a remote controlled camera with a huge zoom lens and infrared lights I made with one. The lights pan and tilt with the lens by the way. The pan/tilt has DC motors and gearing, thats it. No position sensing as far as i could tell.
It does allow variable speed for both the pan and tilt axes. Its remote controllable through that round plug.
Nfs most wanted save game with all blacklist cars on youtube. Nfs Mw SaveGame With All Blacklist Cars Need For Speed Most Wanted. Need for Speed Most Wanted Special Save Game: 2,058: Tobey. Information and comments about the Need For Speed Most Wanted Nfs Mw SaveGame With All Blacklist Cars Login or Create an Account. NFS Most Wanted Save game 100% 214280; NFS Most Wanted BE 1.3 Trainer 126280. 100% (Challenge series, Career and Rap Sheet) savegame with all Blacklist racer's cars and 2+ million cash to spend. Installation: locate your Most Wanted save directory. It should be under Documents folder in NFS Most Wanted. Need for Speed Most Wanted. All Save Files, Step by Step All saved games from the game beginning to the end. He's dumped a whole lot of cash into his car. The Blacklist is a list of racers in Rockport that are of high. For the top 10 racers in Need for Speed: Most Wanted. 3 Need for Speed: Payback/Cars; Explore.
If you wanted to use one for timelapse, I wouldn't bother taking it apart. Just put a relay in the common wire on the remote plug. Use the relay to interrupt the movement except for a short pulse after each exposure is completed. If you have a Dynamic Perception MX-2 controller, use it to power the relay from either of the motor outputs. Any 12 volt relay should work as long as the coil draws less than an amp (pretty much any 12VDC relay). Use the MX-2 in interleaved (shoot, move, shoot) mode. The MX-2 will adjust the duration of the relay-on pulse depending on the inches per exposure you set.
Wire the pan/tilt to the relay contacts that conduct only when the MX-2 wants to move the dolly motor. You can set different speeds for the pan and tilt axes by adjusting the resistance from the common control wire to one or two of the other pins on the remote plug. This way only one motor plug on the MX-2 needs to be used to control two axes on the pan/tilt head and you can move each axis at a different speed if you want. The remote plug on the pan/tilt has five wires. Common, left, right, up, down. Conductivity between common and one or two of the other pins makes it go.
Grease torrent tpb. Version 1.0: Initial version.
Sat Jul 02, 2011 11:45 am. Well i ordered one of these, NEW, unfortunatly it arrived yesterday and it was clearly used, and it was a non functioning unit.
The Automatic mode worked, but the Manual mode does not, it was worn all around with grime in it. I just spoke to the company that sold it to me through amazon and they are sending me a return label, then will ship me a new one.
What a pain in the butt, i really wanted to crack this thing open however they are taking care of it. Mistakes happen. Anyway, my first impression was 'Wow, this thing is small!' It fits on my timelapse Rail Chronos 1.0 nicely. It just LOOKS like it belongs. The movement on the automatic mode is very smooth, very quiet.
The tilt was not working, if it WAS i probably would have kept it, but i did not want to find out that the tilt motor was not working. I opened the front plate, there is a control circuit in there as expected however there are a BUNCH of wires from the control circuit into the housing, i dont think they are all wires for the motors. Being a Bescor 101 i know it has a tab that hits a switch preventing a full 360 degree panning, so the extra wires are probably for that switch. Upon opening the other side (battery side) thats all it is, batteries, and a pair of wires.